About this deal
JST wire housing connector kit in different selections and pins, the white connectors are widely used in the 3D printing industry. This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. These very small male plugs and female sockets can be used to make removal of building interior and exterior lighting and LEDs easier. This ensures dependable continuity when used with low voltage, low current carrying circuits (dry circuits). g. the E-flite Blade mCPX helicopter, the Spektrum AR6400LBL receiver and several Parkzone, E-Flite 'UMX' models.
The wire color scheme matches the Sharp distance sensor pinout: red for power, black for ground, and white for signal. The 3 pin is used on 2S LiPo to eliminate the need for separate discharge and charge/balance connectors. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. pin JST to Breadboard Jumper Cable is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other.This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. This connector was wired to the scroll encoder of a mouse I had and currently am trying to identify it. The connector's width is around a half centimeter in width and came with 28 AWG wires connected to it (if that helps at all). Connectors are easier for professional division of labor, parts replacement, troubleshooting and quick assembly. The four-sided, box-shaped shroud prevents the receptacle from being misinserted or pried during insertion and removal.
Housing material is polyamide 6 and natural colour • Flammability rating complies to UL94 V-0 • Housing featured with locking • Suitable for wire to wire connector syste.This is a handy cable for connecting a five-pin JST GHR-05V type locking connector to breadboard-friendly male pins.
Any images used are representative of the product only and may not accurately depict the actual product. The JST connector plays the role of conducting current and connecting signal in electronic equipment. Number of contacts varies from 2 to 16 pins • 10mm pitch with 2 circuits and 5mm pitch with 6 circuit housings are also available • Nylon 6, UL94V-0. It is fitted with 145mm colour coded power leads and a JST connector at the end and features 2 x M3 mounting holes in the centre so it can be attached to the back of a BBC micro:. Can only be used with any low current products such as 12v grain of wheat and grain of rice bulbs and also many LEDs.
An adapter lead to allow single cell LiPo with 'UM' battery connector to be used on receivers with a JST-PH socket - e.
This link ensures that all data passed between the web server and browser remains private and integral.This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If your charger has only the JST-XH balance socket or does not require connection to the main charge sockets, then select 'no plugs' below and cut the leads off. This product series has some additional information related to it that you can download from the list below.