Tile Grout Masonry Mortar Bag with Molded in Tip Tear Puncture Resistant Heavy Duty Vinyl Piping Cement Bag 13 x 24

Product Information

For further information on Ultrascape Cempoint Gun Applied Mortar, or for help with calculations please contact us on ☎️ 0330 122 1025. This gives the drier particles in the mix to absorb their water; when you come back to it, it will be drier-but not from setting up- and then mix in a bit more water to the consistency you like.

Ultrascape Cempoint meets the strict and exacting standards of BS 7533, and BS EN 998 for masonry mortar and comes supplied in a 25kg showerproof, paper reinforced bag. added some water, then mortar, then added more of both until I thought I had a workable consistency and volume. I'd coat the entire surface with a grout release product, Aqua Mix's has worked well for me, prior to any more grouting. Actually that's pretty good advice, with the caveat that if a hot dry breeze kicks up overnight, you're scrod.Ultrascape Cempoint has a working time at 20°C of 45 minutes, and can accept foot traffic after 12 hours and vehicular traffic after 24 hours. Being wet, you think that the grout would come out easier, but in fact, it was so hard, like wet sand, that it wouldnt come out of the bag at all. Please use our handy calculator to work out how many bags you’ll need or contact us for a little assistance on ☎️ 0330 122 1025.

I'm using the same mortar the brick layers used outside (ready mix) which I saw them use in a grout bag for the brick along the sidewalk but I can't get it to work. a) is a grout bag supposed to be easy for working on around the thousand or so joints between the 500+ bricks that I have ? If the brick are 1/2" thick, you may be able to use a jointer or a pointing trowel on the head joints. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.First time grouter here, hope you are all well, and really hope someone can give me some advice on using a grout bad. Tip size can be modified by cutting to the required size, ideal for all grouting and pointing applications. Pressing the Escape (ESC) button will close the modal and bring you back to where you were on the page. RePoint VE is designed to be installed using a grout bag, mortar pump, or grouting sponge where applicable. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Available VE (Viscosity Enhanced) formulas to allow for pumping, bag install or when greater workability, extended working times are desired. Got a bead around one brick, it was a bit wet, very messy, certainly didnt come out like cake icing ! Cempoint for Walling: UltraScape Cempoint is a cementitious thixotropic mortar, designed for gun injection which provides a clean efficient solution for the pointing and repointing many types of brickwork and masonry facades. Our tile adhesives and grouts are heat, mould and water resistant and perfect for fitting tiles in your bathroom or kitchen.Fill the bag with mortar then twist the top end of the bag – this will force the mortar out of the bag and into the joint openings.