Joined in 2023 
82 
63 About this deal
The upgraded version of the RX2A with longer range. It features better antennas with IPEX connectors so you can easily replace them. Failsafe is available with iBus. A light weight RX that is able to output RSSI on the 14th channel and it supports AFHDS-2A protocol. It has 6 native channels, but can be expanded to 10 channels by updating to a community developed firmware. This allows the full use of all 4 switches and the 2 potentiometers the FS-i6 is fitted with. Flysky FS-i6S
Just to point out for people who don't know, there are 3 versions of the Noble Pro, the EN version, EU version, and the Asian version. The NB4 Noble Pro is equipped with 2 batteries, one in the handle and one in the removable power bank in the base. The base will charge the battery in the handle when connected, when disconnected, the power bank can be used to charge other devices via its USB output. In the standard configuration, the thumb can implement the infinite knob adjustment through two left and right steering wheels, to achieve high-level play (for example, climbing, a turnaround in a very small radius, and vertical upward/downward movement in slopes, etc.) in the breaking transmission in ratio without loosening the throttle and steering wheel. On the other hand, I honestly have to say that out of all the Flysky TX we’ve seen so far, the Flysky i6X is the one I would choose for flying a mini quad. The FS-i6X is inexpensive, provides 10 channels, and can operate on both AFHDS and AFHDS-2A systems. It’s compatible with iBUS/SBUS receivers as well as the older PWM and PPM receivers.
Specifications
The Asian version, which is intended for the Asian market and is capable of displaying characters - Chinese characters for example which the EN/American and EU/European versions can't do.
The i8 and i10 offer more native channels and are well provisioned with switches, however despite the attempt to integrate the updated technology of a touchscreen, I feel that these 2 fail to provide much actual improvement over the i6X.
So much in this hobby is a balancing act, “motor KV” vs. “prop size”, “battery weight” vs. “flight time”, and FlySky receivers are no different. You will be required to do a bit of ‘balancing’ to ensure that you get the features you are expecting from your RX… DUAL BATTERY SYSTEM: The NB4 is equipped with 2 batteries, one in the handle and one removable power bank in the base. The base will charge the battery in the handle when connected and when disconnected the power bank can be used to charge other devices using its USB output. The 2CH (extreme speed) mode breaks through our limit of latency and opens up a new range by using the new radio frequency library algorithm. The multi-dimensional adjustable and expandable system and new ergonomic design Thanks to Loopyroberts for his comment below confirming that the i10 does support the original AFHDS system, so you will be able to bind with older FlySky RX. This receiver was designed together with UndergroundFPV for Flysky Nirvana NV-14. It has diversity antennas and works in AFHDS 2A protocol. Outputs PPM / i-Bus / S-Bus signals.
Support for 9 types of AFHDS3 receivers for 3 different applications (vehicles and boats): different number of channels (4CH—12CH), different sizes, two antenna types (built-in/external), different waterproof grades (PPX6/PPX74), gyroscope functions (GMR+GY01 /INr4-GYB), and built-in special functions (IBUS2 function, Newport function and BVD battery voltage detection function). Another point in favour of iBUS over SBUS is that the signal is un-inverted, so you are not required to invert the signal when using F1 and F4 boards as you do with SBUS. Noble Pro will let you control whatever they are, for example, gears, overhead lights, wipers, seat adjustment, steering wheel rotation, hood switch as long as you need.OpenTX is open source TX firmware, which is a powerful transmitter operating system. It allows you to change menu displays, welcome screens and various other options on your TX via LUA scripts. Three built-in high-performance processing chips allow Noble Pro to have an unprecedented performance boost. The Noble NB4 is equipped with 2 batteries, one in the handle and one removable power bank in the base. The base will charge the battery in the handle when connected and when disconnected the power bank can be used to charge other devices via its USB output. It is used to monitor the model’s battery voltage. The battery voltage can be monitored through from the transmitter. Warnings can be set.
Great Deal 
New Comment