HP JL258A ARUBA 2930F 8G POE+ 2SFP+ SWITCH

Product Information

For use in the SFP⁠+ ports of the JL075A 3810M switch. Also used in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed. Local MAC Authentication assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes

Only supported for use in the SFP⁠+ ports on R0X43A module. 100FX is not supported for use in the R0X44A SFP28 or SFP56 ports of any other 6400 module. speed is NOT supported for the J8177D when used in any port (SFP+, SFP28, or SFP56) on teh 6400 series. X122 1Gb SFP LC BX-U transceiver - Small Form-factor Pluggable (SFP) Gigabit BX (bi-directional) 'upstream' transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on one single-mode fiber - Has one LC 1000BASE-BX10 port Virtual Switching Framework (VSF) virtualises up to four physical switches into one logical device for simpler, flatter, more agile networks.speed is NOT supported for the J8177D or JL747A when used in any port (SFP+, SFP28, or SFP56) on the 6400 series. J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A, J9855A, J9856A X122 1Gb SFP LC BX-D Transceiver - Small Form-factor Pluggable (SFP) Gigabit BX (bi-directional) 'downstream' transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on one single-mode fiber - Has one LC 1000BASE-BX10 port J8177C/J8177D will have a delay (~15 secs) before link up or down is properly displayed when a cable is inserted or removed.

Multimode OM3 LC/LC Fiber Optic cable, 50m (164ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km X121 1Gb SFP RJ45 T Transceiver - Small Form-factor Pluggable (SFP) Gigabit transceiver using 1000BaseT technology - Has one RJ-45 1000BASE-T port - Requires Category 5 100-ohm UTP or STP cable or better Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full onlyCAT 5e cable RJ45 to RJ45 4.3m (14ft) - Up to 1 Gigabit operation, Ethernet cable with (M) RJ45 connectors on each end CAT 5e cable RJ45 to RJ45 7.6m (25ft) - Up to 1 Gigabit operation, Ethernet cable with (M) RJ45 connectors on each end RMON, XRMON, and sFlow® provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

VxLAN encapsulation (tunneling) protocol for overlay network that enables a more scalable virtual network deployment External inline power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 54VDC output, 180 watts - Has attached DC output cable with 4-pin polarized connector with latch Not supported for use in the following 3800 models: J9573A, J9574A, J9575A, and J9576A. The SFP⁠+ ports do not support 100M operation.Multimode OM3 LC/LC Fiber Optic cable, 15m (49.2ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km Premier Flex Multimode OM4 LC/LC Fiber Optic cable, 1.0m (3.28ft) long - Duplex zipcord graded index 50/125um multimode 'bendable' fiber optic cable with LC/MPO connectors on each end (Blue Color) - Optical performance: 4700MHz/km CAT 5e crossover cable RJ45 to RJ45 2.1m (7ft) - Up to 1 Gigabit operation, Ethernet crossover cable with (M) RJ45 connectors on each end Multimode OM3 LC/LC Fiber Optic cable, 1.0m (3.28ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km

X132 10G SFP+ LC ER transceiver - Small Form-factor Pluggable Plus (SFP+) 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 40km (24.9 miles) on OM3 fiber cable - Has one LC 10-GbE port - For use with the 10GbE SFP+ port module ONLY

LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones Only the J8177D is supported (J8177C not supported). J8177D or JL747A can only operate at 1G in the 10000 series. For J8705A and J8706A modules: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 IEEE 802.1X uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards UL 69050-1: 2nd Edition; EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013; IEC 60950-1:2005 +A1:2009 +A2:2013; CSA 22.2 No. 60950-1-07 2nd; EN 60825-1:2014 / IEC 60825- 1:2014 Class 1