LOUQE Raw S1 Mk I (Rhodium Grey) Mini-ITX Computer Case

Product Information

And when all said and done, the Louqe Raw S1 is hands-down the nicest ITX chassis I’ve ever had the honor of working with. From its stunning, elegant single-piece external shell to the simplicity with which a system inside it pieces together, the Raw S1 is a chassis that I’m going to remember. So if you're going into the small cases, enjoy your journey down the rabbit hole! You'll wonder why you ever put up with large towers! This increase in size can be found across all specs comparing the two cases. CPU Heatsink height support also increases from 66 mm in the Ghost S1 to 75mm in the Raw S1. This is, of course, largely thanks to the extra 4 liters of volume that the Raw S1 comes equipped with. It is important to note, however, that it is still an extremely small case. I'm fairly sure that the same issue affecting the CPU performance is affecting the GPU. It's just not able to pull in cool air from outside. People using triple slot GPUs seem to have fewer issues, presumably because the fans are closer to the shell. A duct would probably help this, but it would have to be custom-designed for every model. Internally, the Revolt 3 can also house almost any Mini-ITX system you throw at it, with room for large GPUs, up to a 280mm AIO, two 2.5-inch SSDs and one 3.5-inch drive. Better yet, its layout meanst it doesn't need a PCI-e riser cable, so you won’t have to worry about reduced bandwidth on an RTX 3000 or RX 6000 series graphics card.

The smallest DIY PC cases from just a few years ago have often been thwarted by the increased cooling needs and size of today's components – particularly graphics cards like Nvidia's RTX 4090. But at 10.4 liters, the Mini-ITX Fractal Design Terra case has (just) enough room for most big GPUs, while delivering eye-catching aesthetics thanks to an aluminum exterior with some real wood trip up front. As compact cases go, this is one of the prettiest around. Is it perfect? From one point of view, no. It doesn’t have air filtration. There’s no real front IO, and no room for expansion. But none of that is what the Louqe Raw S1 is about. Extra fans, filtration, and expansion space would make the chassis bigger and more complex, entirely defeating the point.As for looks, the Ghost S1 is most similar. In fact, it looks quite a bit like the same case stood vertically if a few inches were added all around. This is not an issue; the design of the Ghost S1 is a major selling point for many buyers. However, people who were not fans of LOUQE’s last offering are unlikely to change their minds here.

An important note: the Corsair One case is only available in prebuilt configurations, severely limiting GPU and CPU options. Meanwhile, the Raw S1 will support most graphics cards and CPUs on the market thanks to its construction. The Raw S1 is a more subtle design than the Corsair One, opting for simple sides and vents instead of the Corsair One’s LEDs and large vents. Instead, the Raw S1 looks much closer to its smaller brother, the Ghost S1. There are almost no markings or features on the outside of the case. In fact, the front only features one small button for power, and I/O options are limited to a single Type-C placed on an angled panel. The next significant drop in size that I'd recommend is the Ncase M1. It does cost a bit more, but it's an excellent performer that's proven over the test of time. Some of these small sandwich builds can really build the heat on either the GPU or CPU, and some you are forced to use liquid cool. But the Ncase M1 let's you decide how you want to cool it - air or liquid. Great flexiblity, and you even have a Type C port available on the front. Just try to buy a GPU < 300mm in length to install into it. I've even seen 3090 builds in it, so it can definitely be a ton of power in such a small case. For completeness' sake, I ran a set of tests with all the mods. The vented top fan still doesn't really make much of a difference. As an experiment, I tried to figure out the minimum fan speed required to get close to maximum performance. It turns out that with every fan at 75%, I can get within 1% of CPU performance. It's extremely loud, though, and it still doesn't get the GPU Temps down. An anemometer is a device that measures air speed. I measured air speed at 9 points around the exhaust vent and multiplied the average by the approximate area of the vent openings to get an airflow number in CFM. It's not perfect, but it will get us some ballpark numbers. Whoa! This is awful. CPU performance has tanked, and GPU temps are through the roof. The Air Temp tells the story here: even with an exhaust fan, the case is not able to get the hot air out.top exhaust fan - I, and many others on Discord thought this fan mounts on the interior of the case. It doesn't. You have to remove the top lid and mount the fan on top of the shell, which ruins the looks of the case (did anyone really buy this case for a reason other than looks?). It's also a giant pain to wire up because you either have to connect it after the shell is on or have a really long cable. The reason feels deceptive is that none of their pictures show it! They all have the top lid on. That, plus the money you spend on the case is money you’ll save on cutting the RGB and not caring about what your motherboard or GPU look like – not only do you not see the internals – you simply can’t fit much in here. The new RAW S1 promises full gaming PC power in one of the smallest chassis currently available. Its thin, minimum aesthetic is also unique; the popular Corsair One and Ghost S1 are two of the only other thin cases of this size. Outside of these options, it is rare to find other models that can also support powerful components. In an already limited category, LOUQE aims to situate itself as the best option. Aesthetically, the Raw S1 has a unique look that blends a modern style with aggressive, “gamer”-esque patterns and details. Red details on the interior, sand-blasted aluminum, and interesting cooling lines accentuate the look. However, most of the build is a simple sheet of aluminum. LOUQE has masterfully balanced these aesthetic choices with performance thanks to small features like a floating top plate and uni-body construction. It is extremely similar to the Corsair One in size, while their designs differ dramatically. Both are slim, vertical cases that are 12 liters in volume that can fit almost anywhere.