Joint It Simple Jointing Mortar Grey (1 x 20kg) - Large Size

Product Information

Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted.

When applying Joint-It Simple, take care to use plenty of water and remove all excess product from the top of the slabs at the end of the application. All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean annually to keep it looking new. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. Final Cleaning: Clean the surface carefully with a fine hair broom so that all Joint-It residue is removed. Always sweep diagonally across joint. Add more water: Add more water sparingly to help Joint-It flow into joints of the paving, working diagonally across the joints to ensure Joint-It has penetrated all joints of the paving. Preparation:- Make sure all joints are totally clear of any form of dirt, especially oil, grease and remove any loose debris/old jointing mortar or large particles.Traditional polymeric sand or cement methods of jointing are extremely time consuming and laborious. Our simple to use, sweep-in grouting sand means gets the job finished faster and stands the test of time.

Approximate coverage using 4 size random paving per 20Kg tub is 12.5 sq m, depending on joint width and depth. A cancellation request by the consumer must be put in writing to [email protected] and received by the Company within the 7 working day period. Joint-It Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Joint-It Dark Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt.All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean every 3 to 4 months to keep it looking new. This will depend on how shaded your area is and how many overhanging plants there are. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results.

Traditional sand and cement methods of pointing are extremely time consuming and laborious. Our simple to use, sweep-in jointing grout means gets the job finished faster and stands the test of time. Approximate coverage using 4 size random paving per 20kg tub is 10 -12 sq m, depending on joint width and depth or for more accurate calculation please use the handy joint IT calculator Delivery is free of charge to all UK postcodes and will usually arrive within 2-3 working days via DHL.

Take care not to brush the product out of joints or into nearby drains. JOINT-IT will start to harden in joints within 90 minutes at over 20 C degrees. In lower temperatures JOINT-IT will take longer to harden. Once bag is opened, contents must be used within 4 hours.