3m 913 .75 Oz Cream Hardener

Product Information

When mixed with a 2-part filler, a chemical reaction occurs which allows you to make high-quality, long-lasting repairs to metal, masonry, concrete, painted wood, bare wood, drywall and more. The resulting repair can be sanded in 15 minutes and painted in only 45 minutes. The product once mixed with the filler/glaze dries to the natural color of the filler/glaze which can be easily covered with most primer and paint.

3M Filler Hardeners | 3M United States

When mixed with a 2-part filler, a chemical reaction occurs which allows you to make high-quality, long-lasting repairs to metal, masonry, concrete, painted wood, bare wood, drywall and more. The resulting repair can be sanded in 15 minutes and painted in only 45 minutes. Stage 3 — Paint. This stage includes painting the area and blending and smoothing primer and paint. Clean the repair area using soap and water followed by a wax & grease remover/surface cleaner. Sand the surface as needed with grade P40 to P80 3M™ abrasive. However, all these methods do require a bit of patience. A strengthening product, on the other hand, can make a huge difference to the appearance of your nails in weeks. What do nail strengtheners do?Our white cream hardener is ideal for situations in which a neutral color is preferred. The white color allows for keeping the mixture the natural color of the filler/glaze or adding a customized tint if necessary.

Hardeners and Additives - U.S. Chem

Mix the body filler and cream hardener thoroughly, to a uniform color. Gel time/setting time is approximately 3-5 minutes @ 75°F (24°C) using 2% hardener as prescribed. Spread the filler on the mixing board, being sure to break any air bubbles that were introduced during mixing.Mixing with Resin: BPO is typically mixed with the resin just before application. The specific amount of BPO to be added depends on factors such as the resin system, desired curing characteristics, and processing conditions. The resin guidelines and recommendations should be followed for the appropriate BPO-to-resin ratio. Automotive body technicians rely on our filler for its good adhesion, consistent quality and compatibility with most paints. It combines spreading, easy mixing, good featheredging, and non separating properties into one filler. Wearing rubber gloves when handling detergents and bleach is also a must, as overexposure to these chemicals can make nails soft, resulting in them splitting or breaking.