Fiber Cleaver FTTH Fiber Optic Tools High Precision 6C Cable Cutting Fiber Optic Knife Tools Fiber Cleavers 12 Surface Blade

Product Information

In the cleaving process, the brittle glass fiber is fractured in a controlled manner as shown below.

In the field of fiber optics, it is very necessary to use fiber optic cables with clean and smooth end face. The fiber optic cleaver is a crucial tools for low-loss and low-reflectance fiber optic splices or terminations, especially when using the pre-polished connectors with internal splices. The fiber cleaver usually work in conjunction with fusion splicers to do optimum splicing jobs, and is the key to quality connectors and splices. What Is Cleaving and Fiber Cleaver? There are laser-based devices (containing a CO 2 laser) which allow the preparation of fiber ends as an alternative to cleaving. Strictly speaking, the used process is not cleaving (which is a mechanical breaking process) but rather something like laser cutting. Nevertheless, it has become common to name it laser cleaving because it produces similar results. The quality of the obtained cleaves has different aspects, the relevance of which depends on the application: Since fracture is such a violent and difficult to control process, even the best commercial cleaver will sometime produce defective cleaves. Fiber cleaving is an important technique in the area of fiber optics. When optical fibers are connectorized, when they should be fusion-spliced or when light should be launched into fibers, the fiber ends need to be prepared such they have clean surfaces. Usually, such surfaces should be as flat as possible, at least over the area of the fiber core (sometimes over the full cross-section), and often it is important that the surface is either perpendicular to the fiber axis or has a well-defined angle against the fiber axis.And an optical fiber cleaver is the tool to cut (called cleave in the fiber optic industry) the fiber in such a good way. Cleaving is the standard method to obtain such surfaces, or sometimes the first step towards that goal. It is a process of controlled breaking of the glass of a bare fiber. It begins with making a tiny fracture (scratch) on the side of the fiber, e.g. with a sharp diamond, carbide or ceramic blade, before or while some defined tension or bending is applied to the fiber. This causes the fiber to break, starting at the mentioned fracture point: the fracture rapidly propagates over the full fiber cross-section. Often, the cleaving leads to a very clean surface of the obtained two fiber parts.

For very high-quality fiber surfaces, it is often necessary to apply some polishing procedure after cleaving. One may, for example, insert the fiber end into a hollow glass tube and fix it there with a glue. The tube gives the fiber a higher strength and is inserted into a polishing apparatus. The fiber is polished down together with the glass tube. This procedure allows one to produce a high-quality surface with an arbitrary well-defined orientation of the fiber surface. However, it takes substantially more time than simple cleaving. See the article on polishing of fibers for details. Laser Cleaving of Fibers

When we need to join two optical fibers together, we usually use mechanical splice or fusion splice.